Recent Builds

Fleetco builds a wide variety of work trucks, trailers and custom projects. Browse the links below for a more detailed view of our work, and then let us know what we can build for you.

Curbside view of 11-foot flatbed with toolboxes.

FLATBED WITH TOOLBOXES

 

Customer: Perdido Paving & Grading

 

Vehicle: 2021 RAM 5500

 

Job Type: Install an 11-flatbed with both underbody and topside toolboxes. The customer wanted a tailgate and we fabricated custom side panels for the rear of the bed. Also included was a fuel transfer tank.

Western Star 4800 with hooklift and dump body, side view.

40K HOOKLIFT & BODIES

 

Customer: Western Area Power Authority

 

Vehicle: 2020 Western Star 4800

 

Job Type: Supporting electrical utility operations, this customer needed a hooklift built to haul heavy loads in the Rocky Mountain region of Colorado. We installed a 40K Swaploader hooklift, custom fabricated a hitch and supplied several bodies.

Street side shelves with 6-inch and 12-inch parts bins and rack for wire spools.

SERVICE VAN SHELVING PACKAGE

 

Customer: Jerry Pate

 

Vehicle: 2018 Ram ProMaster High Roof Van

 

Job Type: This client runs service vehicles for repair operations. They needed van shelving with small parts storage. We installed Adrian Steel’s Electrical Service Package with a composite partition.

Palfinger ARB with ouboard single stage lift cylinders

CABLE HOIST ROLL-OFF TRUCK

 

Customer: Truckworx of Mobile

 

Vehicle: 2019 Kenworth T370

 

Job Type: We installed a Palfinger/American Roll-Off cable hoist with a 60,000 lbs. capacity along with a rugged Pioneer Rack & Pinion tarp system.

Mercedes Benz refrigerated van with Thermo King unit, curbside view.

DUAL COMPARTMENT REFRIGERATED VAN

 

Customer: Mercedes Benz of Mobile

 

Vehicle: 2018 Mercedes Benz Sprinter High Roof Van

 

Job Type: The customer was looking for a high-roof refrigerated van but also wanted the flexibility of dual-temperature compartments. We installed a refrigeration unit with a custom removable bulkhead.

USCG Trailer exterior view, curbside.

MISSION SUPPORT TRAILER

 

Customer: United States Coast Guard

 

Vehicle: 2019 Rock Solid 28′ Trailer

 

Job Type: Build-out enclosed trailer for use as mobile workspace–The USCG needed two trailers equipped as mobile support units for their Special Missions training operations. Requirements included crew lockers, a large desk area and a 120v/12v power system.

Ford F350 with BrandFX composite body and Tommy Gate G2 liftgate.

UTILITY COMPANY COMPOSITE SERVICE BODY

 

Customer: Cooperative Energy

 

Vehicle: 2019 Ford F350

 

Job Type: This utility provider needed a composite service body. The BrandFX bodies fit the bill. It has incredibly durable fiberglass construction and a treadplate bed floor.

K&K Manufacturing 16-foot medium-duty dump body on International chassis.

MEDIUM DUTY DUMP BODY

 

Customer: Dreamscapes

 

Vehicle: 2007 International 4300 SBA 4×2

 

Job Type: Our landscaper customer was looking for a versatile dump body for an International 4300 chassis. Fleetco installed a 16-foot body from K&K Manufacturing.

Wright's Market Refrigerated Van

REFRIGERATED DELIVERY VAN

 

Customer: Wright’s Market

 

Vehicle: 2018 Ford Transit 148” Wheelbase, Mid Roof Van

 

Job Type: Install van liner and refrigeration unit–The build began with a double layer of Fi-foil insulation and fiberglass liner kit. The client needed chill temperatures rather than full freeze so we installed a Thermo King V320 roof-mount refrigeration unit.

PJ flatbed with side panels and 48-inch underbody tool boxes.

UTILITY COMPANY FLATBED

 

Customer: Baldwin EMC

 

Vehicle: 2019 Ford F550

 

Job Type: We up-fit this cab chassis with an 11-foot flatbed and also included custom fabricated side panels. A grill guard and heavy-duty winch were added up front.

Custom flatbed for Baldwin Portable Toilets.

VACUUM TRUCK FLATBED

 

Customer: Baldwin Portable Toilets

 

Vehicle: 2019 Isuzu N-Series Diesel

 

Job Type: The customer needed a body to accommodate a 300-gallon vacuum tank and still transport up to 8 portable toilets. Fleetco built a custom bed with E-track side-rails and a Tommy Gate G2 liftgate.

Ford F250 with RKI tool boxes, headache rack and liftgate.

LIGHT DUTY WORK TRUCK

 

Customer: Evoqua Water Technologies

 

Vehicle: 2018 Ford F250

 

Job Type: This pickup hauls cylinders and is used for service calls. We installed RKI tool boxes and a headache rack. E-track was added for cargo control. A Tommy Gate lift gate completed the project.

The completed project: International truck with a 26-foot custom flatbed and forklift.

LUMBERYARD FLATBED

 

Customer: Pittman Building Supply

 

Vehicle: 2018 International HV607

 

Job Type: Build custom 26’ flatbed with piggyback forklift–The customer wanted a heavy-duty flatbed fitted with a Trailer Mate TM50 forklift for delivering lumber and construction materials.

Nissan NV Cargo van with Kargo Master ladder rack.

HVAC SERVICE VAN

 

Customer: Sandy Sansing Nissan

 

Vehicle: 2019 Nissan NV Cargo Van

 

Job Type: Install Adrian Steel HVAC package with Kargo Master ladder rack-This Adrian package includes three full-size shelving units and a steel partition. The single drop-down ladder rack positions the ladder on the side of the vehicle for easier loading and unloading.

Proud Partners With